 |
 |
 |
|
|
|
|
| |
| Isothermal Protective Coatings, Inc. is
GREEN! |
| Join
Us In A Green Future! |
| All of us
need to concern ourselves with the responsibility of a
clean, renewable, eco-friendly environment. Many
of us are working toward correcting the errors of the
past, and insuring conservation of the earth's vast
biological diversity. |
|
Energy Savings |
|
Chart A
[below]
shows the results of a study done by scientists
at Lawrence Berkeley Laboratory on the energy
savings associated with putting a white,
reflective roof coating on a building.
Depending on the original Solar Reflective Index
of the roof, the white coating lowered the air
conditioning bills from at least 25% to as much
as 67%!
Chart B identifies the
factors that contribute to the absorption or
reflection of solar energy by roof type.
Acrylink G ™
is listed at the far right of the chart. |
 |
chart
A |
 |
chart
B |
|
|
Conservation Concerns |
|
Acrylink
G™
is and environmentally responsible product, both in the
end use and manufacture. Acrylink
G™
is applied on top of your existing roof, thus
eliminating the time, money and landfill burden of
re-roofing. At the end of the term of an
Acrylink
G™
roof, there's no need for a tear off, just re-coat.
Due to Acrylink
G™'s
high solar/UV reflectance values, Acrylink
G™
meets "Cool
Roof" standards for the
City of Houston and many other city and regional
codes as well as being
Energy Star Certified. With low dirt pick
up, Acrylink
G™
maintains its high reflectivity for many years.
The low VOC (volatile organic content) is beneficial to
sensitive environments both during and after
application. Acrylink
G™
is environmentally safe. 
The high solids, high tech proprietary formulation of
Acrylink
G™
is acid rain resistant, reduces fuel costs,
significantly reduces the energy load on a building,
prolongs the life of HVAC equipment, and saves energy
thus reducing the pollution caused by additional power
plants needed. IPC uses recyclable packaging for
all of its products. 99.96% of the raw materials
used to manufacture Acrylink
G™
are made in the United States of America. Our
clean factory holds a
No Exposure Certification (NEC) from the
Texas Commission of Environmental Quality.
See IPC's Technical
Specification Manual for Material Safety Data Sheets
(MSDS) |
| |
|
Please
recycle- We do! |
|
|
 |
|
 |
 |
 |
1950 O'Day Road
Pearland, Texas 77581
USA
|
(800) 237-8759
(281) 485-4440
FAX (281) 485-8223 |
| |
|
|
|
©
Copyright 2008 Isothermal Protective Coatings, Inc. (IPC),
Pearland, Texas, all rights reserved. |
|
