IPC -  HOME

About AcrylinkG
IPC Products

Product/Application Specifications


Contact Us

 
IPC is American Owned and Operated.  All IPC Products Are Made in the USA in Pearland, Texas.

 
Warranties Offered By Isothermal Protective Coatings, Inc.
IPC offers two kinds of warranty coverage available: a Materials Warranty and a System Warranty. Either warranty can be for a term of five (5), ten (10), or twenty (20) years, depending on the thickness of the coating applied membrane.

Because of the cost of inspection and processing, roofs of less than 20,000 ft² are normally warranted by the contractor, not the manufacturer. For roofs of 20,000 ft² or larger, IPC ordinarily charges no inspection fees. IPC will consider warranting smaller roofs on a case by case basis, but an inspection fee is usually charged to cover the inspection and administrative costs.

Warranty Fees: IPC charges no fee for its Materials Warranty (IPC warrants the membrane to remain leak free for the term of the warranty, and will supply materials to repair any leaks for the duration of the warranty). For the full System Warranty, IPC charges $0.01 per square foot per year (the System Warranty covers the materials and the labor required to repair any leaks in the membrane for the duration of the warranty).

Limitations: Of course IPC can only be responsible for the roof if it is left intact. Earthquakes, substrate movement, hail damage, fire damage, hurricanes, vandalism, etc., are not covered under our warranty. See specimen Warranties for specific exclusions.

Please Note: This Warranty Information is only a general summary. In no way does it alter, augment, or replace the language, meaning, or legal standing of the written Warranty itself. Please refer to the Warranty specimen itself for all questions regarding exclusions or limitations, and the responsibilities of the building owner, the contractor, and IPC.

For more information, including specimen Warranties, see the "Reference Materials" section of IPC's Technical Specifications Manual page.

 
 
 

         

IPC is American Owned and Operated.  All IPC Products Are Made in the USA in Pearland, Texas.
 

Home  |  Brochure  |  Acrylink G  |  Products  |  Green  |  Specifications  |  Warranty  |  About IPC  |  Contact Us  |  Photos  |  Map To IPC  |  Top of Page
 

1950 O'Day Road

Pearland, Texas 77581 

USA
 

(800) 237-8759
(281) 485-4440
FAX (281) 485-8223
     

  © Copyright 2008 Isothermal Protective Coatings, Inc. (IPC), Pearland, Texas, all rights reserved.